Blue-angel-pumps BPC2 User Manual download pdf

Self-Priming Transfer

Pumps

Table of Contents

Description . . . . . . . . . . . . . . . . . . . . . .1

Unpacking . . . . . . . . . . . . . . . . . . . . . . .1

Safety Guidelines . . . . . . . . . . . . . . . . .

General Safety Information . . . . . . . . .

Installation. . . . . . . . . . . . . . . . . . . . . . .2

Operation . . . . . . . . . . . . . . . . . . . . . . .2

Maintenance . . . . . . . . . . . . . . . . . . . . .3

Troubleshooting Chart

. . . . . . . . . . . . .4

Replacement Part Information

. . . . 6-7

Warranty . . . . . . . . . . . . . . . . . . . . . . . .8

Description

These self-priming transfer pumps are

designed to easily transfer water from

one point to another. Model BPC1, 12

Volt Transfer Pump is convenient when

normal power is not readily available.

Typical applications include removing

water from pool covers, clogged

drains, stock tanks, water basins, boats,

cisterns, etc. Model BPC2, 120 Volt

Transfer Pump is great for household

usage. Typical applications include

removing water from waterbeds,

clogged sinks, basements, etc. Note:

Do NOT use BPC2 in pool areas. The

motors on both models BPC1 and BPC2

are non-submersible with overload

protection.

General Safety Information

CALIFORNIA PROPOSITION 65

This product or

its power cord may

contain chemicals known to the State

of California to cause cancer and birth

defects or other reproductive harm.

Wash hands after handling.

GENERAL SAFETY

Do not submerge

motor or allow

motor to be exposed to water. Personal

injury and/or death could result. Keep

pump and power cords away from

liquids. Model BPC1 becomes very hot

during operation.

Do not pump gasoline or

other explosive liquids. Do

not operate pump where

ﬂammable or explosive fumes or gases

are present as a ﬁre or explosion could

result. Pump should only be used to

pump clear water. Do not run pump

dry.

1. Read all instructions

before operation.

2. Protect electrical cord

from sharp objects, hot

surfaces, oil and chemicals. Avoid

kinking the cord and replace

damaged cords immediately.

This pump has been

evaluated for use

with water only.

Unpacking

Inspect this unit before it is used.

Occasionally, products are damaged

during shipment. If the pump or

components are damaged, return

the unit to the place of purchase for

replacement. Failure to do so could

result in serious injury or death.

READ & FOLLOW ALL INSTRUCTIONS

SAVE THESE INSTRUCTIONS

DO NOT DISCARD

Safety Guidelines

This manual contains information

that is very important to know and

understand. This information is

provided for SAFETY and to PREVENT

EQUIPMENT PROBLEMS. To help

recognize this information, observe the

following symbols.

Danger indicates an

imminently

hazardous situation which, if not

avoided, WILL result in death or serious

injury.

Warning indicates a

potentially

hazardous situation which, if not

avoided, COULD result in death or

serious injury.

Caution indicates a

potentially

hazardous situation which, if not

avoided, MAY result in minor or

moderate injury.

Notice indicates

important

information, that if not followed, may

cause damage to equipment.

NOTE: Information that requires special

attention.

Please read and save these instructions. Read carefully before attempting to assemble, install,

operate or maintain the product described. Protect yourself and others by observing all safety

information. Failure to comply with instructions could result in personal injury and/or property

damage! Retain instructions for future reference.

The Professional’s Line

For parts, product & service information

visit www.blueangelpumps.com

REMINDER: Keep your dated proof of purchase for warranty purposes!

Attach it to this manual or file it for safekeeping.

321201-002 11/08

Operating Instructions & Parts Manual BPC1 and BPC2 Series

MANUAL

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - Self-Priming Transfer

Self-Priming Transfer PumpsTable of ContentsDescription . . . . . . . . . . . . . . . . . . . . . .1Unpacking . . . . . . . . . . . . . . . . . . . .

Page 2 - Installation

Models BPC1 and BPC2 include a 6’ suction hose, a water suction attachment, and a replacement parts kit which includes: impeller, gasket, shaft seal,

Page 3 - BPC1 and BPC2 Series

4 Connect pump to power source, with pump in a dry location. Model BPC1: Motor must be connected to a fully charged automotive tractor or marine type

Page 4 - Troubleshooting Chart

4Operating Instructions and Parts ManualTroubleshooting Chartwww.blueangelpumps.comSymptom Possible Cause(s) Corrective ActionPump will not start or r

Page 5

5BPC1 and BPC2 SeriesNoteswww.blueangelpumps.com

Page 6 - Call 1-888-636-6628

6For Replacement Parts or Technical Assistance, Call 1-888-636-6628Please provide following information: Address any correspondence to:- Model numbe

Page 7

7Replacement Parts List for Self-Priming Transfer Pumps 1 Brush and Impeller Kit 66062-WYN1 66058-WYN1 A. Impeller 1 B. Gask

Page 8 - Limited Warranty

8Operating Instructions and Parts Manualwww.blueangelpumps.comLimited WarrantyFor one year from the date of purchase, Blue Angel Pumps will repair or

Related models: BPC1

Comments to this Manuals

No comments

Blue-angel-pumps BPC2 User Manual

Browse online or download User Manual for Pumps Blue-angel-pumps BPC2. Blue Angel Pumps BPC2 User Manual

Summary of Contents

Related models: BPC1

Comments to this Manuals

Related products and manuals for Pumps Blue-angel-pumps BPC2